Wayne-Dalton 9600, 9400, 9100 installation instructions U-Bar- Asymmetrical, Installation

8	U-Bar
Tools Needed:	NOTE: If you have a model 9600 Series
Power Drill	door with windows in the top section or
	9100 Sonoma (8’ high), skip this step
7/16” Socket	and complete step 9.
Driver	NOTE: Model 9100 Series door over 13’
	wide require a 3” U-Bar (supplied).
	Place the 3” u-bar over the top rib.
	Fasten each end of the u-bar to the
	endstile with (2) 1/4”- 20 x 11/16” self
	drilling screws.
	Fasten center of the u-bar as shown
	to the rib using (2) 1/4”- 14 x 5/8” self
	tapping screws 6” to the left and 6”
	inches to the right of the center of the
	door section.
	NOTE: Upon completion of this step,
	continue with Step 10.

6” 6”

		operator
	U-Bar	bracket
		(installed in
(4) 1/4”- 20 x 11/16”		step 10)
	top door section
SELF DRILLING SCREWS

attaching center of u-Bar attaching ends of u-Bar

INSTALLATION

9	U-Bar - Asymmetrical			6”	6”
Tools Needed:	NOTE: If a 3” U-Bar was installed in step	30” to 36”
Power Drill	8, skip this step.
7/16” Socket	NOTE: Model 9600 glazed top doors			operator
	13’-0” wide or greater will be supplied		U-Bar
Driver				bracket
	with a 3” asymmetrical u-bar for the top
			1/4”- 14 x 5/8” Self	(installed in
	section.
		(2) 1/4”- 20 x 11/16”	Tapping screws	step 10)
	Place the 3” asymmetrical u-bar over the	SELF DRILLING SCREWS
	top rib. Fasten each end of the u-bar to		top door section
	the endstile with (2) 1/4”- 20 x 11/16”
	self drilling screws.

Fasten center of the u-bar as shown to the rib using (2) 1/4”- 14 x 5/8” self tapping screws 6” off of the center of the door section.

Fasten both walls of the u-bar as shown using 1/4”- 14 x 5/8” self tapping screws every 30-36 inches. (approximately 18 self tapping screws per 18’ u-bar)

attaching center of u-Bar	attaching intermediates of u-Bar
	17

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com