Wayne-Dalton 9400, 9100, 9600 installation instructions Stacking Sections, Installation

6	Stacking Sections
Tools Needed:	NOTE: For door section identification
Power Drill	see page 4.
7/16” Socket	NOTE: Make sure hinge leafs are
Driver	flipped down, when stacking another
	section on top.
	Place rollers in hinge tubes of the
	second section (lock section).
	With assistance, lift the second section
	and guide rollers into the vertical
	tracks.
	Keep sections vertically aligned and
	fasten hinges to connect the sections
	using 1/4”- 14 x 5/8” self tapping
	screws.
	Repeat for other section(s) except top
	section.
	IMPORTANT: End Hinges have (2)
	screws and Intermediate hinges
	have (3) screws.
	NOTE: Install lock at this time (sold
	separately). See instructions in
	OPTIONAL SIDELOCK INSTALLATION on
	page 28.

LOCK SECTION

(2) 1/4”-14 X 5/8”

SELF TAPPING SCREWS

end hinges (left hand shown, right hinge symmetrically opposite)

(3)1/4”-14 X 5/8” SELF TAPPING SCREWS

INSTALLATION

intermediate hinges

15

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com