Wayne-Dalton 9600, 9400, 9100 installation instructions Nylon Center Bushing

17	Nylon Center Bushing
Tools Needed:	Slide the nylon center bushing into the		Torsion
9/16” Socket	stationary spring cone at the end of the		Spring
	spring and align the stationary spring
Ratchet Wrench	cone(s) with the holes in the center		Stationary
	bearing bracket. Secure the spring(s) to
		Center bearing	Spring cone
9/16” Wrench	the center bearing bracket with	bracket
	(2) 3/8”- 16 x 1-1/2” hex head bolts
	and (2) 3/8”- 16 nuts.
	IMPORTANT: Springs under tension
	can be dangerous.		Nylon center
	IMPORTANT: The spring warning	Stationary	bushing
	tag(s) supplied must be securely
		Spring cone
	attached to the stationary spring
	cone in plain view. Should a		INSTALLATION
	replacement spring warning tag
	be required, contact Wayne-
	Dalton Corp. for free
	replacements.
		Torsion
		Spring
		Center bearing
		bracket
			(2) 3/8”- 16 Nut
		Torsion
		Spring
		(2) 3/8”- 16 x 1-1/2”
		hex head bolt
			23

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com