Wayne-Dalton 9100, 9400, 9600 installation instructions Top Brackets

7	Top Brackets	1st
		set
	NOTE: This step may be pre-assembled	2nd
Tools Needed:		set
Power Drill	on some models.	3rd
7/16” Socket	To install the L-shaped top brackets,	set
	align the top holes in the top bracket
Driver
	base with:
	a) the second set of holes in the endstile
	for 14” radius track.
	b) the first set of holes in the endstile for
	10” & 12” radius track.
		1st Set
	Fasten using (4) 1/4”- 14 x 5/8” self	(10” & 12” Radius)
	tapping screws.	top section
	Secure the top bracket slide to the	2nd set	(4) 1/4” - 14 x 5/8”
		(14” radius)	SELF TAPPING
	bracket base using (2) 1/4”- 20 x 5/8”
			SCREWS
	carriage bolts and (2) 1/4”-20 flange	TOP BRACKET BASE
	hex nuts.
	The top bracket slide will be tightened
	and adjusted in Step 13. Insert rollers
	into top bracket slide. Repeat for other
	side.		(2) 1/4”- 20 x 5/8”
			CARRIAGE BOLTS
		TOP BRACKET SLIDE
		TOP SECTION
			(2) 1/4”- 20
			FLANGE HEX
			NUTS
			ROLLER
		TOP SECTION	TOP BRACKET SLIDE
16

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com