SUPER MICRO Computer X7DBi+ user manual Bios Error Beep Codes, Error Message, Description

Appendix A: BIOS Error Beep Codes

Appendix A

BIOS Error Beep Codes

During the POST (Power-On Self-Test) routines, which are performed each time the system is powered on, errors may occur.

Non-fatal errors are those which, in most cases, allow the system to continue the boot-up process. The error messages normally appear on the screen.

Fatal errors are those which will not allow the system to continue the boot-up pro- cedure. If a fatal error occurs, you should consult with your system manufacturer for possible repairs.

These fatal errors are usually communicated through a series of audible beeps. The numbers on the fatal error list, on the following page, correspond to the number of beeps for the corresponding error.

BIOS Error Beep Codes

Beep Code

1 beep

Repetition of the pat- tern of (1 long beep+ a short pause)

Error Message

Refresh

Memory error

Description

Circuits have been reset. (Ready to power up)

No memory detected in the system

1 long beep + 2 short	Display memory	Video adapter missing or with
beeps	read/write error	faulty memory
1 continuous beep	System Overheat	1 continuous beep with the
(with the front panel		front panel OH LED on)
OH LED on)

A-1