SUPER MICRO Computer X7DBi+ I/O Device Configuration, KBC Clock Input, Serial Port a, Interrupt

X7DBi+ User's Manual

I/O Device Configuration

Access the submenu to make changes to the following settings.

KBC Clock Input

This setting allows you to select clock frequency for the keyboard controller. The options are 6MHz, 8MHz, 12MHz, and 16MHz.

Serial Port A

This setting allows you to determine how Serial Port A is managed by the system. The options are Enabled (user defined), Disabled, and Auto (BIOS- or OS- controlled).

Base I/O Address

This setting allows you to select the base I/O address for Serial Port A. The options are 3F8, 2F8, 3E8, and 2E8.

Interrupt

This setting allows you to select the IRQ (interrupt request) for Serial Port A. The options are IRQ3 and IRQ4.

Serial Port B (*Not for external use, used for IPMI only)

This setting allows you to determine how Serial Port B is managed by the system. The options are Enabled (user defined), Disabled, Auto (BIOS controlled) and OS Controlled.

Mode

This setting allows you to set the Port B. The options are Normal

type of device that will be connected to Serial and IR (for an infrared device).

Base I/O Address

This setting allows you to select the base I/O address for Serial Port B. The options are 3F8, 2F8, 3E8 and 2E8.

Interrupt

This setting allows you to select the IRQ (interrupt request) for Serial Port B. The options are IRQ3 and IRQ4.

Parallel Port

This setting allows you to determine how your parallel port is managed by the system The options are Enabled (user defined), Disabled and Auto (BIOS-or OS- controlled).

Base I/O Address

Select the base I/O address for the parallel port. The options are 378, 278 and 3BC.

4-16