
www.ti.com
SRIO Registers
5.102 Port Error Rate Threshold CSR n (SPn_ERR_THRESH)
Each of the four ports is supported by a register of this type.
Figure 158. Port Error Rate Threshold CSR n (SPn_ERR_THRESH)
ERROR_RATE_FAILED_THRESHOLD | ERROR_RATE_DEGRADED_THRES |
LEGEND: R = Read only; |
|
| |
| Reserved |
| |
LEGEND: R = Read only; |
|
Table 132. Port Error Rate Threshold CSR n (SPn_ERR_THRESH) Field Descriptions
Bit | Field | Value | Description |
|
| These bits provide the threshold value for reporting an error condition due to a possibly broken link. | |
| AILED_THRESH |
|
|
| OLD |
|
|
|
| 0x00 | Disable the error rate register |
|
| 0x01 | Set the error reporting threshold to 1 |
|
| 0x02 | Set the error reporting threshold to 2 |
|
| ... |
|
|
| 0xFF | Set the error reporting threshold to 255 |
|
| These bits provide the threshold value for reporting an error condition due to a degrading link. | |
| EGRADED_THR |
|
|
| ES |
|
|
|
| 0x00 | Disable the error rate Register |
|
| 0x01 | Set the error reporting threshold to 1 |
|
| 0x02 | Set the error reporting threshold to 2 |
|
| ... |
|
|
| 0xFF | Set the error reporting threshold to 255 |
Reserved |
| Reserved |
206 | Serial RapidIO (SRIO) | SPRU976 |
|
| Submit Documentation Feedback |