
www.ti.com
SRIO Registers
5.111 Port Control Symbol Transmit n (SPn_CS_TX)
Each of the four ports is supported by a register of this type.
Figure 167. Port Control Symbol Transmit n (SPn_CS_TX)
STYPE_0 | PAR_0 | PAR_1 | STYPE_1 |
LEGEND: R = Read only; |
|
| |
12 |
| ||
CMD | CS_E | Reserved |
|
| MB |
|
|
RW- |
| ||
| 0x00 |
|
|
LEGEND: R = Read only; |
|
|
|
| Table 141. Port Control Symbol Transmit n (SPn_CS_TX) Field Descriptions |
Bit | Field | Value Description |
STYPE_0 | Encoding for control symbol that makes use of parameters PAR_0 and PAR_1. | |
PAR_0 | Used in conjunction with stype0 encoding. | |
PAR_1 | Used in conjunction with stype0 encoding. | |
STYPE_1 | Encoding for control symbol that makes use of parameter CMD. | |
CMD | Used in conjunction with stype1 encoding to define the link maintenance commands. | |
12 | CS_EMB | When set, forces the outbound flow to insert control symbol into packet. Used in debug mode. |
Reserved | Reserved |
SPRU976 | Serial RapidIO (SRIO) | 217 |
Submit Documentation Feedback |
|
|