![](/images/new-backgrounds/1206494/206494409x1.webp)
www.ti.com
SRIO Registers
5.101 Port Error Rate CSR n (SPn_ERR_RATE)
Each of the four ports is supported by a register of this type.
Figure 157. Port Error Rate CSR n (SPn_ERR_RATE)
ERROR_RATE_BIAS | Reserved | ERROR_RATE |
|
| _RECOVERY |
LEGEND: R = Read only; |
|
|
| ||
PEAK_ERROR_RATE | ERROR_RATE_COUNTER |
|
| ||
LEGEND: R = Read only; |
|
|
Table 131. Port Error Rate CSR n (SPn_ERR_RATE) Field Descriptions
Bit | Field | Value | Description |
| These bits provide the error rate bias value. | ||
| IAS |
|
|
|
| 0x00 | Do not decrement the error rate counter |
|
| 0x01 | Decrement every 1ms (nominal) |
|
| 0x03 | Decrement every 10ms (nominal) |
|
| 0x07 | Decrement every 100ms |
|
| 0x0F | Decrement every 1s (nominal) |
|
| 0x1F | Decrement every 10s (nominal) |
|
| 0x3F | Decrement every 100s (nominal) |
|
| 0x7F | Decrement every 1000s (nominal) |
|
| 0xFF | Decrement every 10000s (nominal) |
|
|
| Other values are reserved |
Reserved |
| Reserved | |
|
| These bits limit the incrementing of the error rate counter above the failed threshold trigger. | |
| ECOVERY |
|
|
|
| 00b | Only count 2 errors above |
|
| 01b | Only count 4 errors above |
|
| 10b | Only count 16 errors above |
|
| 11b | Do not limit incrementing the error rate count |
| This field contains the peak value attained by the error rate counter. | ||
| ATE |
|
|
ERROR_RATE_C |
| These bits maintain a count of the number of transmission errors that have occurred. If this value | |
| OUNTER |
| equals the value contained in the error rate threshold trigger register, then an error will be reported. |
SPRU976 | Serial RapidIO (SRIO) | 205 |