
www.ti.com
SRIO Registers
5.2Peripheral Identification Register (PID)
The peripheral identification register (PID) is a constant register that contains the ID and ID revision number for that peripheral. The PID stores version information used to identify the peripheral. All bits within this register are
| Figure 58. Peripheral ID Register (PID) |
Reserved | TYPE |
LEGEND: R = Read only; |
|
CLASS | REV |
LEGEND: R = Read only; |
|
|
| Table 29. Peripheral ID Register (PID) Field Descriptions |
Bit | Field | Value Description |
Reserved | Reserved | |
TYPE | Peripheral type: Identifies the type of the peripheral RIO | |
CLASS | Peripheral class: Identifies the class Switch Fabric | |
REV | Peripheral revision: Identifies the revision of the peripheral. This value should begin at 0x01 and be | |
|
| incremented each time the design is revised . |
SPRU976 | Serial RapidIO (SRIO) | 99 |
Submit Documentation Feedback |
|
|