SCPI Compliance Information The following commands are device-specific to the Agilent 34401A. They
are not included in the 1991.0 version of the SCPI standard. However,
these commands are designed with the SCPI format in mind and they
follow all of the syntax rules of the standard.
Many of the required SCPI commands are accepted by the multim et er
but are not described in this manual for simplicity or clari ty. Most of
these non-documented commands duplicate the func tionality of a
command already described in this chapter.
MEASure
:CONTinuity?
:DIODe?
SAMPle
:COUNt {<value>|MINimum|MA Ximum}
:COUNt? [MINimum|MAXimum]
[SENSe:]
FUNCtion "CONTinuity"
FUNCtion "DIODe"
FREQuency:VOLTage:RANGe {< ran ge>|MINimum|MAXimum}
FREQuency:VOLTage:RANGe? [MINimum|MAXimum]
FREQuency:VOLTage:RA NGe:AUTO {OFF|ON}
FREQuency:VOLTage:RA NGe:AUTO?
PERiod:VOLTage:RANGe {<range>| MINimum|MAXimum}
PERiod:VOLTage:RANGe? [MIN im um|MAXimum]
PERiod:VOLTage:RANGe:AUT O {O FF|ON}
PERiod:VOLTage:RANGe :AUTO?
ZERO:AUTO?
SYSTem
:LOCal
:REMote
:RWLock
CALCulate
:AVERage:MINimum?
:AVERage:MAXimum?
:AVERage:AVERage?
:AVERage:COUNt?
:DB:REFerence {<value>|MINimum|MAXimum}
:DB:REFerence? [MINimum|MAXimum]
:DBM:REFerence {<value>|MI Nimum|MAXimum}
:DBM:REFerence? [MINimum|M AX imum]
:FUNCtion {NULL|DB|DBM|AVE Ra ge|LIMit}
:FUNCtion?
:LIMit:LOWer {<value>|MINi mum|MAXimum}
:LIMit:LOWer? [MINimum|MAX im um]
:LIMit:UPPer {<value>|MINi mum|MAXimum}
:LIMit:UPPer? [MINimum|MAX im um]
:NULL:OFFSet {<value>|MINi mum|MAXimum}
:NULL:OFFSet? [MINimum|MAX im um]
CALibration
:COUNt?
:SECure:CODE <new code>
:SECure:STATe {OFF|ON},<cod e>
:SECure:STATe?
:STRing <quoted string>
:STRing?
CONFigure
:CONTinuity
:DIODe
INPut
:IMPedance:AUTO {OFF|ON}
:IMPedance:AUTO?