Ranging
(continued)
•Front-Panel Operation: Use the front-panel RANGE keys to select
autoranging or manual ranging. Fo r frequency and period
measurements from the front panel, ranging applies to the signal’s
input voltage, not its frequency.
See also “To Select a Range,” on page 20.
•Remote Interface Operation: You can set the range using any of the
following command s.
CONFigure:<function> {<range>|MIN|MAX|DEF},{<resolution>|MIN|MAX|DEF}
MEASure:<function>? {<range>|MIN|MAX| DEF},{<resolution>|MIN|MAX|DEF}
<function>:RANGe {<range>|MINimum|MAXimum}
<function>:RANGe:AUTO {OFF|ON}
Chapter 3 Features and Functions
Measurement Configuration
62