Alternative button allocation in PIP mode
Note:
The PIP function (picture in picture) is only available in the TV mode. Your TV device must support this function.
You switch the PIP function on and/or off with the PIP button. If the remote control is in the PIP mode the following buttons serve as controllers for the PIP functions:
Button | Normal function | Function in PIP mode |
| move up in the | PIP + |
| menu |
|
| move down in the | PIP — |
| menu |
|
| switch to AV | PIP source |
|
|
|
| move left in the | PIP size |
| menu |
|
|
|
|
| move right in the | PIP position |
| menu |
|
|
|
|
Faults / Remedies
Your device does not react to the remote control.
>> Check the batteries. They must have enough voltage and be properly installed.
>> Firstly have you pressed the correct device button r for the desired target device?
>> Check to see that the correct code is programmed in for the target device (see section "Programming the remote control").
The remote control is transmitting the commands in- correctly.
>> Press the corresponding device button to set the remote control to the correct mode.
>> The batteries must have enough voltage and be properly installed.
>> It is possible that you are using the wrong code. Start the brand code search, the automatic code search or the direct code input (manual).
- 25 -
