- 10 -

Background Illumination

When the lighting circumstances are poor you can activate
the display's background illumination. Bear in mind that this
will reduce the lifespan of the batteries.
1. Press once the LIGHT button t. From now on the LCD
display q will illuminate with each button press for
approx. 8 seconds.
2. PressthisbuttononcemoretoswitchotheLCD
display's background illumination.

Child protection system

With the child protection system the channel buttons
(CH+, CH—, 0-9) can be locked for individual devices.
1. Hold down the SET button e for a little longer than
3 seconds.
2. With the or button h select "CONFIG" and
conrmwiththeOKbuttonl.
3. With the or button h select "KIDS LOCK" and con-
rmwiththeOKbuttonl. The LCD display q shows the
currentdeviceandalwaysoersthesetting"OFF"inde-
pendent of the current setting.
4. With the or button h select now between "ON"
(childprotectionon)or"OFF"(childprotectiono).
5. With the OK button l you save the setting. In the LCD
display q appears "SUCCESS" and then "KIDS LOCK".
6. To exit this menu press repeatedly the EXIT button j until
the standard display appears in the LCD display q.
SeTUP - System settings
In the system settings you undertake the following:
Programming the remote control to the devices to be •
controlled
Setting the time of day, display contrast and child •
protection
The "learning" of determined button commands•
Setting up Macros•
Assigning favourites•
etc.•