SIIG 04-0202A dimensions DOS/Windows, Type in edit autoexec.bat, then press Enter

Page 5

DOS/Windows 3.1x:

1.Insert the Driver Installation diskette, from the C: prompt, type in copy a:\dos\*.*, then press <Enter>.

3.Add C:\CB20XPC.exe at the bottom of the autoexec.bat file.

4.Go to File, save the changes and exit.

5.Remove the diskette and restart the system for the new setup to take effect.

Image 5

Contents Dimensions Features and BenefitsSystem Requirements Serial interfacePackage Contents Hardware InstallationSoftware Installation Windows NT To verify successful installation in Windows 95/98/98 SE/METo verify successful installation in Windows To verify successful installation in Windows NTFrom Choose Destination Location window, click Next To change the I/O address in Windows NTType in edit autoexec.bat, then press Enter DOS/WindowsUpdate TroubleshootingContact SIIGs RMA Department Technical Support Return Merchandise Authorization RMAComplete the RMA form Ship the ProductFCC Compliance Statement