SIIG 5053, 5052 manual Windows XP 32-/64-bit, At the Found New Hardware Wizard, click Cancel

Page 5

7.Wait while the InstallShield Wizard configures your system. Depending on your system hardware this process may take several minutes to complete.

8.At InstallShield Wizard Complete, click Finish.

Windows XP (32-/64-bit)

1.At the Found New Hardware Wizard, click Cancel.

2.Insert the driver CD. Click Start, Run. Type D:\Setup.exe, click OK. (Change D: to match your CD\DVD-ROM drive letter)

3.At Welcome, click Next.

4.Select I accept the terms of the license agreement, click Next.

5.At Ready to Install the Program, click Install.

6.Wait while the InstallShield Wizard configures your system. Depending on your system hardware this process may take several minutes to complete.

7.At InstallShield Wizard Complete, click Finish.

5

Image 5
Contents Key Features and Benefits USB3.0Single ExpressCard/34 Quick Installation GuideIntroduction Serial Number StickerLayout Package ContentsSystem Requirements USB Power Cable Installation optional Windows 7 32-/64-bit / Vista 32-/64-bit InstallationWindows XP 32-/64-bit At the Found New Hardware Wizard, click CancelTo Verify Successful Installation SIIG, Inc Stewart Avenue Fremont, CA 94538-3152, USA RMA # Technical Support and WarrantyAbout SIIG, Inc