Hardware Installation
General instructions for installing the card are provided below, since the design of portable computers may vary. Refer to your system’s reference manual for further information, if needed.
1.Power off your portable computer and any other connected peripheral devices.
2.Insert the PC Card into the CardBus Type II slot of your PC with its
3.Power on your notebook PC.
Software Installation
This section will guide you through the installation of your 1394
Windows 98SE Driver Installation
1.At the Add New Hardware Wizard, click Next.
2.Choose Search for the best driver for your device, and click Next.
3.Uncheck all the boxes, click Next, Next, Next.
Note: If you are prompted to insert your Windows Installation
4.Click Finish, then restart Windows to complete the driver installation.
3