Before using the inverter, Using the inverter

14.before using the inverter

Important Safety Instructions:

14.1Keep the 1150 well ventilated in order to properly disperse heat generated while it is in use. Make sure there are several inches of clearance around the top and sides and do not block the vents on the back of the 1150.

14.2Make sure the 1150 is not close to any potential source of flammable fumes, gases or clothing.

14.3Keep the 1150 dry.

14.4DO NOT allow the 1150 to come into contact with rain or moisture.

14.5DO NOT operate the 1150 if you, the 1150, the device being operated or any other surfaces that may come in contact with any power source are wet. Water and many other liquids can conduct electricity, which may lead to serious injury.

14.6Do not place the 1150 on or near heating vents, radiators or other sources of heat.

14.7Do not place the 1150 in direct sunlight. The ideal air temperature for operation is between 50° and 80°F.

14.8Do not use inverter near open engine compartment where fumes or gases may accumulate.

14.9Do not modify the AC receptacles in any way.

15.using the inverter

It is important to know the continuous wattage of the device you plan to use with the inverter. The Portable Power 1150 must be used with devices drawing 400 watts or less. If the wattage is not marked on the device, use only devices that draw less than 4 Amps of AC.

Devices like TVs, fans or electric motors require additional power to start (commonly known as the “starting or peak power”). The Portable Power 1150 can supply a momentary surge in wattage; however even devices rated less than the maximum 400 watts can exceed the inverters surge capability and cause an automatic overload shutdown.

Make sure the device you are using is compatible with a modified sine wave inverter.

CAUTION: Always run a test to establish whether the inverter will operate a particular piece of equipment or device.

NOTE: In the event of a power overload, the inverter is designed to auto- matically shut down. This safety feature prevents damaging the inverter while testing devices and equipment with the 400-watt range.

Note: If powering more than one device, start one device at a time to avoid a power surge and/or inverter overload. The surge load of each de- vice should not exceed the inverter’s Continuous Operation wattage rate.

•9 •

200.71988 specifications

The Sears 200.71988 stands as a remarkable example in the realm of consumer products, offering a blend of quality and value that has become synonymous with the Sears brand. As a versatile appliance, it is designed to meet the demands of modern households, combining functionality with user-friendly features.

One of the key characteristics of the Sears 200.71988 is its robust construction. Built with durable materials, this product is engineered to withstand the rigors of everyday use. The attention to detail in its design ensures that it not only performs efficiently but also maintains its aesthetic appeal over time.

In terms of technology, the Sears 200.71988 incorporates advanced functionality that enhances user experience. It features a high-efficiency motor that provides powerful performance while consuming minimal energy, making it an eco-friendly choice for the environmentally conscious consumer. This efficiency not only reduces energy bills but also minimizes the carbon footprint associated with its usage.

Furthermore, the appliance is equipped with an intuitive control panel that offers various settings, allowing users to customize their experience based on individual needs and preferences. This user-friendly interface facilitates seamless operation, making it suitable for users of all ages.

The dimension and size of the Sears 200.71988 have been carefully considered to fit a wide range of spaces, making it an ideal choice for both large and small homes. The compact design ensures that it can be easily stored when not in use, yet remains accessible for routine tasks.

Another notable feature of the Sears 200.71988 is its emphasis on safety. Integrated safety mechanisms prevent overheating and ensure that the appliance operates within safe parameters, providing peace of mind to users, particularly in households with children or pets.

Overall, the Sears 200.71988 exemplifies a commitment to quality and innovation, delivering a product that is not just functional but also reliable. It stands out as a valuable addition to any household, combining modern technology with ease of use, making it a preferred choice among consumers seeking dependable household solutions. Whether for everyday tasks or special occasions, the Sears 200.71988 proves to be a trusted companion, reflecting the timeless values of the Sears brand.