Sears 200.71988 manual

Page 6

3.charging the internal battery important:

•charge immediately after purchase

•keep fully charged.

This Portable Power 1150 comes with a sealed, non-spillable DieHard maintenance-free lead-acid battery. This internal battery is specifically designed to deliver high power jump-starting as well as repetitive deep cycling performance.

To charge the Portable Power 1150’s internal battery:

3.1Check the internal battery’s charge level by pressing the switch marked DISPLAY. The Digital Display will show the battery’s percentage. Charge if under 100%

Note: Internal battery’s percentage is most accurate when the Portable Power 1150 has been disconnected from all devices and charging sources for 1 - 24 hours.

3.2To charge, plug the (external) wall charger cord into the socket on the back of the 1150. Then, plug the wall charger into a 120V AC source.

CAUTION: Operating the Portable Power 1150 while the internal battery is being charged may cause permanent damage to the unit.

3.3While the 1150 is charging, the battery’s percentage of charge will be displayed. When the internal battery is fully charged, the display will show 100. Complete charging may take up to 48 hours. The 1150 is then ready to use.

3.4Once the battery is fully charged, the internal charging circuitry automati- cally switches to float-mode monitoring, which keeps the battery fully charged without overcharging.

The internal battery may also be charged while you drive using the male- to-male accessory cable (available separately, see “Accessories and Re- placement Parts” section of this manual). Insert one end of the accessory cable into the 12V DC power outlet and the other end into the vehicle’s accessory outlet (lighter socket). Completely disconnect the accessory cable when the engine is not running.

• 3 •

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Portable Power Page Table of Contents Important Charge Immediately After Purchase Diehard portable power 1150 jump-starter/dc power source Jump Start ON/OFF Switch Turn on to activate clamps and USBPage Jump-starting a vehicle engine Powering a 12v dc device Digital display functionsTo Operate a 12V DC Device Using the built-in light Internal battery replacement Using the air compressorEstimated Time for Inflating Using the inflator Using the deflatorBefore using the inverter Using the inverterPowering a 110v ac device Ac electrical device example run-time chartCustomer Technical Assistance Replacement parts SpecificationsAc power specifications Air Compressor Accessory Kit 3 Hose Adaptors

200.71988 specifications

The Sears 200.71988 stands as a remarkable example in the realm of consumer products, offering a blend of quality and value that has become synonymous with the Sears brand. As a versatile appliance, it is designed to meet the demands of modern households, combining functionality with user-friendly features.

One of the key characteristics of the Sears 200.71988 is its robust construction. Built with durable materials, this product is engineered to withstand the rigors of everyday use. The attention to detail in its design ensures that it not only performs efficiently but also maintains its aesthetic appeal over time.

In terms of technology, the Sears 200.71988 incorporates advanced functionality that enhances user experience. It features a high-efficiency motor that provides powerful performance while consuming minimal energy, making it an eco-friendly choice for the environmentally conscious consumer. This efficiency not only reduces energy bills but also minimizes the carbon footprint associated with its usage.

Furthermore, the appliance is equipped with an intuitive control panel that offers various settings, allowing users to customize their experience based on individual needs and preferences. This user-friendly interface facilitates seamless operation, making it suitable for users of all ages.

The dimension and size of the Sears 200.71988 have been carefully considered to fit a wide range of spaces, making it an ideal choice for both large and small homes. The compact design ensures that it can be easily stored when not in use, yet remains accessible for routine tasks.

Another notable feature of the Sears 200.71988 is its emphasis on safety. Integrated safety mechanisms prevent overheating and ensure that the appliance operates within safe parameters, providing peace of mind to users, particularly in households with children or pets.

Overall, the Sears 200.71988 exemplifies a commitment to quality and innovation, delivering a product that is not just functional but also reliable. It stands out as a valuable addition to any household, combining modern technology with ease of use, making it a preferred choice among consumers seeking dependable household solutions. Whether for everyday tasks or special occasions, the Sears 200.71988 proves to be a trusted companion, reflecting the timeless values of the Sears brand.
Top Page Image Contents