Important Safety Instructions

Save These Instructions

Before using your PID-200, read and understand this Owner’s Manual.

•Keep the inverter well ventilated in order to properly dis- perse heat generated while it is in use. Make sure there are several inches of clearance around the top and sides and do not block the slots of the inverter.

•Make sure the inverter is not close to any potential source of flammable fumes, gases or clothing.

•Keep the inverter dry.

•DO NOT allow the inverter to come into contact with rain or moisture.

•DO NOT operate the inverter if you, the inverter, the device being operated or any other surfaces that may come in contact with any power source are wet. Water and many other liquids can conduct electricity, which may lead to serious injury.

•Do not place the inverter on or near heating vents, radia- tors or other sources of heat.

•Do not place the inverter in direct sunlight. The ideal air temperature for operation is between 50° and 80°F.

•Do not use the inverter near an open engine compart- ment.