Schumacher PID-200 Device demands more than 200 Watts continuous power, Inverter is too hot

Page 9

5.Device demands more than 200 Watts continuous power.

Cycle inverter power OFF and ON.

If problem persists, use a larger inverter or a smaller device.

6.Inverter is too hot.

Increase ventilation to inverter. Move inverter to a cooler area.

Reduce the power consumption of the device.

PROBLEM: Inverter Does Not Turn On

Reason/Solution

1.Poor contact at terminals. Unplug and reinsert PID-200.

2.Fuse is blown.

A blown fuse is usually caused by reverse polarity or a short circuit within the inverter. To replace, contact a qualified service technician who will diagnose the inverter and replace the fuse with the appropriate replacement.

3.Inverter may be defective.

See warranty and call Customer Service 800-621-5485 (Hours: 7 a.m. – 4:30 p.m. CST).

Image 9
Contents Includes 12 Volt Accessory Plug with 36 Cable and USB Port Important Safety Instructions Wash hands after handling Before Using PID-200 power InverterOperating Instructions How to use the 12 Volt Accessory PlugPower Source How to use the USB PortDevice Type Estimated Wattage Usage ExamplesDigital display Troubleshooting Problem Inverter Does Not Turn On Device demands more than 200 Watts continuous powerInverter is too hot Inverter may be defectiveSpecifications Limited Warranty Page Manual DEL Dueño Instrucciones Importantes DE Seguridad Guarde Estas InstruccionesAntes de Usar el Inversor PID-200 Las manos después de manejarloCómo usar el Enchufe de Accesorio de 12 voltios Instrucciones DE OperaciónFuente DE Potencia Cómo usar la Puerta USBEjemplos DE Usos Tipo de Dispositivo Vataje EstimadoPantalla digital Problema La Alarma Suena Solución DE ProblemasVoltaje de 12 voltios muy alto El fusible se ha quemado El Inversor puede ser defectuosoEspecificaciones Garantía Limitada
Related manuals
Manual 12 pages 45.26 Kb