Velodyne Acoustics CHT-15 Troubleshooting and Service, Thank you for purchasing a Velodyne

Page 10

inputs and turn off the unit after several minutes when there is no longer any signal at the inputs.

If you plan to leave the sub unused for an extended period of time, we recommend that you turn off the unit by the master power switch on the rear panel.

Troubleshooting and Service

Before seeking service for your subwoofer, please re-check all settings.

Following is a simple troubleshooting guide to assist you.

1.Verify unit is plugged in and power outlet used is active and supplying proper voltage?

2.Is power switch on?

3.Is auto turn on/off set properly?

4.Is unit receiving an input signal from your source?

5.Have all controls on subwoofer (volume, crossover, phase, etc.) been properly set?

6.If unit has been running at high levels for an extended period of time, one of the protection circuits may be engaged.

7.Is the built-in amplifier extremely hot to the touch? If so, allow the built-in amplfier to cool before turning power on again.

If the protection circuitry is active, the unit may cycle on and off until operating parameters return to normal. Under more serious conditions, the unit may shut off completely. Normal operation will return upon cooling, but you may be required to turn the power off and then on again to reset the unit.

The following conditions require service by a qualified technician:

1.The power cord has become damaged.

2.The unit does not appear to operate normally or exhibits a marked change in performance.

3.The unit has been exposed to water.

4.Some part of the cabinet or circuitry is physically damaged.

Thank you for purchasing a Velodyne!

9

Image 10
Contents CHT-15 Page Prior to installation Product Features and ControlsCongratulations Inputs InstallationVolume control Low-pass crossoverPower switch Phase adjustment- 0˚ to 180˚High pass crossover switch Line-level connectionTo Satellite Speakers Subwoofer outputsSpeaker-level connection Installation using speaker-level from amplifier inputs Interconnect cablesPlacement Care of your subwooferTroubleshooting and Service Thank you for purchasing a VelodyneFor Your Records Other Velodyne Subwoofer Products

CHT-15 specifications

The Velodyne Acoustics CHT-15 is a remarkable subwoofer that embodies the brand's legacy of innovation and superior sound performance. Designed to deliver deep, thunderous bass, it is ideal for both home theater setups and high-fidelity music listening. The CHT-15 features a powerful 15-inch driver, which is engineered to produce accurate and impactful low-frequency sounds. This featured driver is capable of reaching frequencies as low as 18 Hz, effectively handling the most demanding audio tracks with ease.

One of the standout aspects of the CHT-15 is its use of advanced digital signal processing (DSP) technology. This ensures that the audio output is optimized for the specific acoustic environment, allowing for clear and precise sound reproduction without distortion. The built-in amplifier delivers 400 watts of continuous power, with dynamic peaks reaching up to 1000 watts. This ample power translates into impressive volume levels, ensuring that even the most action-packed movie soundtracks are dynamic and immersive.

The cabinet of the CHT-15 is designed with performance in mind, featuring a braced enclosure that minimizes vibrations and resonance. This construction enhances the overall sound quality, allowing for deep bass notes that are tight and well-defined. The subwoofer’s finish is both professional and appealing, allowing it to seamlessly blend into any home décor.

Connectivity options on the CHT-15 are versatile, including line-level RCA inputs as well as speaker-level inputs. This makes it easy to integrate the subwoofer into a wide range of audio systems, whether you're using it with a surround sound system or a high-end stereo setup.

Moreover, its patented "automatic room adjustment" technology measures real-time characteristics of the listening environment and adjusts the subwoofer’s performance to ensure optimal sound quality. This innovative feature sets the CHT-15 apart, making it a user-friendly option for those wanting professional-grade sound without the technical complexities usually associated with such systems.

In summary, the Velodyne Acoustics CHT-15 subwoofer combines robust engineering, cutting-edge technology, and outstanding performance features. Its powerful driver, advanced DSP capabilities, and thoughtful design make it a top choice for anyone looking to enhance their audio experience. Whether for cinematic thrills or musical enjoyment, the CHT-15 provides the deep bass necessary to make every listening experience as engaging and enjoyable as possible.