This chapter lists frequently asked ques- tions related to recording with Cubase LE, with answers to these questions.
Q. I have finished making input settings, but the meter of the audio track is not moving.
A.Make sure that the monitor button of the track is enabled.
Monitor
Q. I would like to record two channels simultaneously for a stereo recording.
A.Before you record, press the stereo/ mono select button of the track so that the yellow indicator is lit. In this case, the track input is shown as In 1 + In 2 or a similar indication.
Stereo/mono select
7 – Troubleshooting
EQ bypass
Q.I
A.Make sure that the left and right locator
region is set to the entire range that you want to mix down.
Q. I cannot set the locator region to more than ten min- utes.
A.The default setting is ten minutes. From the Project menu, choose Project Setup and adjust the length of the project.
Q. I am trying to use the EQ, but it does not seem to do any- thing.
A.Check the VST channel settings etc. to make sure that EQ bypass is not enabled.
TASCAM