Tascam Computer Hardware manual Setup Tweaks Things to Do During the Install, Booting from CD

Page 7

Booting from CD

You will need to tell your computer to boot from the Windows CD-ROM instead of your (presumably blank and formatted) hard drive. To do so, you must access your computer’s BIOS (usually hitting DELETE key during boot up will access the BIOS; some computers use F8 or another key, so check your computer’s documentation or the manufacturer’s website). Once in the BIOS, you will need to change the order of boot up devices. This is normally set for (1) floppy drive, (2) hard disk, (3) CD-ROM. Make the CD-ROM the first boot device. Put the Windows CD in the drive and restart. After stepping through the boot up you’ll see a message “Press any key to begin installing Windows.”

Setup Tweaks – Things to Do During the Install

There are some actions you will need to take during the initial XP installation, as they set certain system defaults which are much more difficult to change later.

FAT32 vs. NTFS

You have the option under W2k and XP to choose the file system that best suits your needs, FAT or NTFS. FAT (File Allocation Table) is the native file system based on the Windows 9x kernel (including 95, 95a, 95b, 95c, 98, 98se and ME). NTFS (New Technology File System) is the native file system for operating systems based on the Windows NT kernel (including NT4, 2000 and XP). During the installation, Win2K or XP will ask if you want to convert the installation partition to NTFS. If you need compatibility for Windows 98 – especially if you want to dual-boot – don't convert.

While NTFS offers a number of improvements over FAT32, most of these advantages are not all that applicable to audio, and you are unlikely to see a major performance difference between the two. Moreover, defragmenting your drives (something you should do on a regular basis anyway) is substantially quicker in FAT32. Be aware that Windows 9x cannot read data on NTFS-formatted drives. Generally speaking, you should use FAT32 if you are doing a parallel installation with Windows 9x/ME, or if you will need to work with files created with a FAT32 system (opening old song files, working with others using FAT32-based systems, etc.) leave everything with FAT32.

One exception would be if you’ll be working with video or other large files in excess of 4 GB; or if you also use your PC to browse the internet or the computer is part of a LAN running XP Professional. Only NTFS can limit access rights to your files and therefore provide the security needed for a networked computer. In this case, select NTFS for all partitions except those which are to accommodate your audio data later.

7

Image 7
Contents Optimizing Windows 2000 and Windows XP for Audio Introduction Windows XP Home or Professional? Deciding on an OSHardware requirements Give it Time Update or fresh install?Preparing for installation Formatting your Hard Disk InstallationBooting from CD Setup Tweaks Things to Do During the InstallFAT32 vs. Ntfs Acpi Mass Storage Devices Dual BootMultiple Users Updates and service packsWindows Messenger System Performance Tweaks Stuff to Do After InstallingBackground Display Display propertiesDisabling Transition Effects Disabling Windows System sounds Windows SoundsPerformance System RestoreVirtual memory Adjusting Display for Best PerformanceSetting Virtual Memory Fast user switchingDisabling Fast User Switching Auto Start and System ServicesPage Disk I/O Performance Logging UDMA/ATA Mode for Hard DrivesWrite Behind Caching Separate Drives How and Where Checking DMA Transfer ModeVirus and other Utilities Defrag OftenPlugIns and other Goodies XP and Win2000 ResourcesStay Up to Date