Table of contents | Tascam IF-FW/DM specification

Table of contents
INTRODUCTION	2
FEATURES	3
SYSTEM REQUIREMENTS	3
Macintosh	3
Windows	3
DM-3200 Requirements	3
DM-24 Requirements	3
Trademarks	3
INSTALLATION	4
CONFIGURE FOR YOUR MIXER	4
INSTALLING THE IF-FW/DM	4
MAKING CONNECTIONS	5
CONFIGURING THE COMPUTER....	5
Macintosh	5
Windows	6
Windows 64-Bit	6

SETUP	7
IF-FW/DM Interface Setup	7
CUBASE / NUENDO	7
SONAR	7
LOGIC	7
DIGITAL PERFORMER	7
SYSTEM CLOCKING	8
MASTER CLOCK	8
CLOCK SETTINGS	8
96 k & 88.2 k Operation	8
IF-FW/DM & MIXER ROUTING	8
MIXER OUTPUTS	8
DM-3200	8
DM-24	9
MIXER INPUTS	9
DM-3200	9
DM-24	9
THE IF-FW/DM CONTROL PANEL
(WINDOWS)	10
ENABLE WDM	11

Introduction

Thank you for purchasing the TASCAM IF - FW/DM FireWire audio card for TASCAM mixers. It is designed to provide audio and MIDI interfacing between your TASCAM mixer and your computer based DAW, essentially turning your TASCAM mixer into a FireWire audio/MIDI interface.

Please take some time to look through this Owner’s Manual and familiarize yourself with the IF-FW/DM’s features, setup and operation. We suggest you pay particular attention to the setup notes for your com-

puter platform of choice (Mac or PC). You may also need to refer to your software’s documentation for a clear understanding of how to set up an audio/MIDI interface from within your software. Your experience with the IF-FW/DM will be greatly enhanced by a good working knowledge of your audio soft- ware.

Be sure to check the TASCAM web site at www.tascam.com to ensure you have the latest software updates for your IF-FW/DM.

TASCAM IF-FW/DM Owner's Manual