Important Safety Guidelines
This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire.
To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display. Keep these instructions in a safe place for future reference.
To avoid the risk of electric shock or component damage, switch off the power before connecting other components to the X22 LCD monitor.
Unplug the power cord before cleaning the X22 LCD monitor. A damp cloth is sufficient for cleaning the X22 LCD monitor. Do not use a liquid or a spray cleaner for cleaning the product. Do not use abrasive cleaners.
Always use the accessories recommended by the manufacturer to insure compatibility.
When moving the X22 LCD monitor from an area of low temperature to an area of high temperature, condensation may form on the housing.
Do not turn on the X22 LCD monitor immediately after, to avoid causing fire, electric shock, or component damage.
Do not place the X22 LCD monitor on an unstable cart, stand, or table. If the X22 LCD monitor falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the X22 LCD monitor.
Any heat source should maintain a distance of at least 5 feet away from the X22 LCD monitor, i.e. radiator, heater, oven, amplifier etc. Do not install the product too close to anything that produces smoke or moisture. Operating the product close to smoke or moisture may cause fire or electric shock.
Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the X22 LCD monitor and to protect it from overheating, be sure these openings are not blocked or covered. Do not place
SCEPTRE X22 | Page11 |