Placement, Inputs | Velodyne Acoustics STARFIRE-10, STARFIRE-12

w w w . c h r y s a l i s a c o u s t i c s . c o m

Placement

The first step in installing your new Starfire is to determine where it will be placed in the room. Unpack the system carefully and use the following guidelines in order to find the best room placement option.

True subwoofers operate at extremely low frequencies which are primarily omni-directional. Keep in mind that frequency response and output level can be drastically influenced by placement, depending on the acoustic properties of the listening room. To obtain optimum output from your subwoofer, place it within a foot of a corner. This location will offer the greatest output levels and optimum low frequency extension. If at all possible, your subwoofer should be placed along a wall. The worst location for a subwoofer is typically far away from any walls and close to the center of your room. Avoid these locations when possible. When using a pair of Chrysalis subwoofers in stereo, it is preferable to place each subwoofer near the satellite of the same channel.

Depending on the size and type of furnishings in the room, perfect placement may not be possible. Finding the best location within your environment will likely require some experimentation. We suggest you experiment with the location during setup to find what sounds best to you when seated in your typical listening position.

Regardless of where you install your Chrysalis subwoofer, it must remain in an upright position (woofer facing forward). Using, shipping or storing the subwoofer in any other position for an extended period of time may result in damage to the unit not covered by warranty.

Caution!

This subwoofer has electronics built into the cabinet. Do not place the cabinet next to sources of heat such as furnace registers, radiators, etc. Do not place the unit near sources of excessive moisture, such as evaporative coolers, humidifiers, etc. The power cord should be routed in such a way that it will not be walked on, pinched or compressed in any way that could result in damaging the insulation or wire.

Your Chrysalis Starfire subwoofer is NOT magnetically shielded, primarily for use with modern video monitors. Should you find it necessary to use it with an older CRT monitor or TV, keep it at least two feet from the monitor. Experiment for correct distance by minimizing distortion of the picture and colors.

I N S TA L L AT I O N

Inputs

Your new subwoofer is equipped with speaker-level and line-level inputs. Use the LINE LEVEL jacks when connecting your subwoofer to a pre-amp, signal processor (such as LFE out), line-level crossover, or receiver with pre-amp level outputs. When using the line level jacks, some receivers may not provide enough signal to have the unit’s auto-on feature operate properly. Additionally, this lack of signal may also cause the subwoofer to produce less output than it is capable of.

Starfire Series Manual

STARFIRE-10, STARFIRE-12 specifications

Velodyne Acoustics has long been recognized for its pioneering efforts in high-performance audio systems, and their STARFIRE series of subwoofers, specifically the STARFIRE-12 and STARFIRE-10, further solidifies this reputation. These two models are designed to deliver powerful, deep bass with exceptional clarity and precision, making them suitable for both home theater enthusiasts and music lovers alike.

The STARFIRE-12 features a 12-inch driver, while the STARFIRE-10 is equipped with a 10-inch driver, allowing both models to cater to different room sizes and listener preferences. One of the standout features of both subwoofers is Velodyne's advanced Digital Signal Processing (DSP), which optimizes the audio output and ensures that the bass is tight and accurate, free from distortion, even at high volume levels.

Another prominent technology featured in the STARFIRE series is the patented High-Excursion driver design. This innovative driver allows for greater movement, enabling the subwoofers to produce more significant air displacement, leading to deeper bass response. The drivers are also housed in solid enclosures designed to minimize cabinet resonance, further enhancing the audio experience by delivering a cleaner sound.

Connectivity is another area where the STARFIRE models shine. Both subwoofers offer multiple connectivity options, including line-level inputs, speaker level inputs, and balanced XLR inputs, facilitating easy integration into various audio systems. Moreover, the adjustable phase control allows users to synchronize the subwoofer with their main speakers, ensuring seamless sound reproduction throughout the listening environment.

The STARFIRE models also come with a comprehensive suite of adjustable settings that enable users to customize their audio experience. Features such as variable crossover control and volume adjustment enable fine-tuning to suit individual preferences and room acoustics.

In terms of aesthetics, both the STARFIRE-12 and STARFIRE-10 models sport a sleek, modern design that blends seamlessly into any home décor. Their compact size and iconic Velodyne build quality make them an attractive addition to any audio setup without sacrificing performance.

In summary, Velodyne Acoustics' STARFIRE-12 and STARFIRE-10 subwoofers are crafted with cutting-edge technologies and features that deliver unmatched audio performance. With advanced driver designs, powerful DSP, and customizable settings, these subwoofers offer an immersive listening experience that caters to the needs of even the most discerning audiophiles.