Contents |
|
Tools needed for installation | 2 |
IBeam Specifications | 2 |
Recommended Amplifier Specifications | 2 |
Introduction and Precautions | 3 |
Vehicle Installation | 4 |
Home Theater Installation | |
Troubleshooting | 7 |
Warranty | 7 |
Tools needed for installation.
Drill
Drill bit for pilot holes. 1/8” (3mm)
#2 Phillips head bit with extension OR #2 Phillips head screwdriver. Wire cutters
Wire strippers (16/14 or 12AWG)
You will also need an adequate length of 16/14 or 12 AWG (American Wire Gauge) speaker wire for connection to your IBeam tactile transducer.
IBeam Tactile Transducer Specifications
|
| Model Number: | |
|
| Size (H x W x D): | 2.0” x 4.25” x 6.875” |
2.00" |
| Weight: | 2.5 lbs (1.13 Kg) |
(5.08cm) |
| Force / Watt: 2.5 lbs/Watt (11.1 Newtons/Watt) | |
|
| ||
|
| Continuous Power Handling: | 100 Watts |
6.875" |
| Peek Power Handling: | 250 Watts |
| Overload Protection: | PPTC self reset fuse | |
(17.46cm) | 4.25" | ||
| Impedance: | ||
| (10.79cm) | ||
|
| Frequency Response: | 20Hz – 800Hz |
Recommended Amplifier Specifications
Minimum: Amplifiers producing 100 Watts @
Optimum: Amplifiers producing 150 – 250 Watts @