Home Theater Installation
Home Theater Connection
CAUTION:If you feel unsure about installing this system yourself, have it installed by a qualified home theater technician.
CAUTION:Before installation, power off and unplug your equipment to prevent damage to the unit, fire and/or possible injury.
The IBeam can be powered by any 4 ohm stable amplifier that provides a minimum of 100 Watts RMS @ 4 ohms. Amplifiers with 150 – 250 Watts @ 4 ohms offer the best experience.
1.
CAUTION:Be sure to route wires were they will not be tripped over or become damaged due to sharp edges or from the movement of furniture or people.
2.Connect the speaker wires to the IBeam and mark them to maintain proper signal polarity when connecting to the amplifier.
Connection to a system with a designated sub output.
3.Follow the instructions provided with the amplifier being used to connect it to the sub output on your home theater system.
4.Connect the speaker wires from the IBeam to the output on the amplifier. Be sure to main- tain proper signal polarity for best performance.
Connection to a system with no sub output.
5.When connecting to a system with no designated sub output, a crossover will be required. A crossover with settings of
Connect to home theater system.
Amplifier
Line Level | Speaker Output | |||||||
Input | ||||||||
|
|
|
|
|
|
| ||
Maintain signal polarity.
PUSH
To insert
wire