Savin SLP38C manual Press # for Test Print Bypass, Set Sheet, then# A3 297 X

Page 46

Clearing and Adjusting the Printer

Note

❒The current resolution is dis- played on the printer driver properties.

❒To adjust the color registration on thick paper, select "Thick: 600dpi" regardless of the cur-

2

rent resolution.

H Confirm that the following mes- sage is displayed, and then press

{Enter}.

Press # for Test

Print (Bypass)

The following message appears on the panel display. The size of the paper loaded in step A is shown.

Set Sheet, then#

A3 (297 X 420)

I Confirm that A4Lor larger paper is in the Bypass Tray, and then press {Enter}.

The Test Sheet is printed. See P.40 “Test Sheet Samples”

J Press {U} or {T} to make the off- set settings, and then press {En- ter}.

When such a clear (not smeared in red) square as the sample is:

•at its center position, select "0".

•shifted to the left, select "-1".

•shifted to the right, select "+1".

Select Action:

0: Exit

Select Action:

-1: Re-adjust

If you select "0: Exit", the printer re- turns to the previous menu.

If you select "-1" or "+1", the printer returns to step H. Keep adjusting until "0" is available.

K Press {On Line}.

"Ready " appears on the panel dis- play.

Ready

Manual Adjust

Important

❒Normally, do not perform manual color adjustment.

A Press {Menu}.

 

 

On Line Menu

 

Escape

Job Reset Form Feed

 

#Enter

Power

Error

Data In

 

 

ZDJS001N

"Menu" appears on the panel dis- play.

B Press {U} or {T} to display "Main- tenance", and then press {Enter}.

Menu:

Maintenance

The maintenance menu is dis- played.

C Press {U} or {T} to display "Col- or Regist.", and then press {Enter}.

38

Select Action: +1: Re-adjust

Maintenance: Color Regist.

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Maintenance Guide Page Trademarks Safety Information Safety During OperationIii Low-power Mode Energy Saver mode Specifications Energy Star ProgramHow to Read This Manual SymbolsTable of Contents Replacing Consumables and Maintenance Kit Detaching the SR770 2 Tray FinisherPush up the lock release button and keep it in place Opening and Closing the Duplex Reversal UnitLower the Duplex Reversal Unit slowly until it stops Replacing the Toner Cartridge Add TonerShake the toner cartridge back and forth 5-6 times Unhook the green hook on the toner cartridge with one handTake out a new toner cartridge from the box Loading Toner Close the upper right coverReplace Fuser Oil Unit TypeG Turn off the power switch and unplug the power cableReplacing the Fuser Oil Unit Pull out the left cover of the print- er slowlyDo not touch any areas other than the handle ZDJH054E Plug in the power cable and turn on the power switch Replace Color PCU Type a Replacing the Photoconductor UnitReplace Black PCU Type F Take out the green screwdriverLift the inner cover until it clicks into place and holds Remove the Photoconductor Unit you want to replaceInstall a new Photoconductor Unit Take the unit out from the bagLower the inner cover slowly Tighten two screws using provid- ed screwdriverCalibrating Turn the light brown lever clock- wiseReplace Black Dev. UnitTypeD Replacing the Development UnitReplace Color Dev. UnitTypeB Install a new Development Unit Remove the Development UnitZDJH227J Please Wait Replace Fusing Unit Type C Replacing the Fusing UnitPull out the left cover of the print- er Remove the Fuser Oil Unit in the direction of the arrow Press # for Fuser Adjust Initializing Please WaitOpen the Bypass Tray Adjust the side guides to the paper widthSet Sheet Bypass, then # Pull out the Bypass Tray Exten- sion, and then flip it openReady C D E F G H 0 0 0 0 0 0 0Invalid Value Press # Replacing the Dustproof Filter Wear the glove on either handAttach the small filter Replacing the Waste Toner Bottle Replace Waste Toner Type EPush it in until it stops Pull out all trays slowly while lift Ing it up a little Check the contents of the boxReplacing the Paper Feed Rollers Confirm the position of the paper feed rollersZERH040E ZERH090E Replacing Consumables and Maintenance Kit Clearing and Adjusting the Printer Cleaning the Registration Roller Close the right cover by pushing the area labeled PushCleaning the DustProof Glass Adjusting the Color Registration When replacing the fusing unit Completed Color Regist Auto AdjustWhen you have made all the set- tings, press On Line Fuser Adjust At Unit Replace Color Regist Fuser AdjustCannot Adjust See User’s Guide Invalid Value Cannot AdjustWhen color shifting occurs Fuser Adjust Custom AdjustCustom Adjust Plain 600dpi Load A4L or larger paper in the Bypass TrayPress # for Test Print Bypass Select Action Exit Re-adjustSelect Action +1 Re-adjust Maintenance Color Regist Set Sheet, then# A3 297 XAdjustment a -7.0 +7.0 +0 Color Regist Manual AdjustManual Adjust Print Result Adjustment a -7.0 +7.0 +2ColorRegistSheet Fuser Adjust Sheet Test Sheet SamplesFuser Adjust Sheet Menu Maintenance Ready Adjusting the Image DensityMaintenance Image Density Image Density BlackRegistration Adjustment Adjusting the Registration of the TraysMaintenance Registration Registration Prt. Test SheetAdjustment Vert. Tray Vert. Tray 3 -4.0 +4.0Appendix Removing Misfed Paper in the Duplex Feed UnitAppendix Removing Misfed Paper in the Duplex Feed Unit Close Front Cover When the Front Cover Does Not ClosePush in the Transfer Unit until it stops When the Front Cover Does Not Close Toner cartridge ConsumablesStaple Cartridge Other consumables Name Consumables Average printable number PagesPaper Recommendations Plain PaperThick Paper OHP transparenciesEnvelopes Paper not supported by this printerPrintable Area Index Copyright UE USA G060-6920

SLP38C specifications

The Savin SLP38C represents a compelling choice in the world of color laser printers, designed to meet the diverse printing needs of small to medium-sized businesses. This versatile printer combines advanced features with high-quality performance, making it suitable for various applications, from intricate graphics to vibrant presentations.

One of the standout features of the SLP38C is its exceptional print resolution. With a maximum resolution of up to 1200 x 1200 dpi, it produces crisp, detailed prints that are sure to impress. This level of clarity is particularly beneficial for marketing materials and professional documents that require a polished look. The printer also offers fast print speeds, with outputs of around 38 pages per minute for black and white and color prints. This efficiency helps streamline workflow, especially in busy office environments.

The SLP38C employs cutting-edge LED technology, which enhances both print quality and reliability. The LED system minimizes moving parts, resulting in less wear and tear and a longer lifespan for the printer. Additionally, its compact design allows it to fit comfortably in tight workspaces without sacrificing print quality or speed.

Connectivity is another significant advantage of the Savin SLP38C. It features multiple connectivity options, including USB, Ethernet, and support for wireless networking. This flexibility allows users to connect seamlessly from various devices, including computers, mobile devices, and tablets, making it easier to print from virtually anywhere in the office.

The printer's user-friendly interface is another highlight. The intuitive control panel simplifies navigation through settings, print jobs, and maintenance tasks. Furthermore, the SLP38C supports automatic duplex printing, which not only saves paper but also reduces the overall cost of printing.

In terms of handling, the Savin SLP38C boasts an impressive paper capacity. It comes with a standard paper tray that can hold up to 250 sheets, with optional additional trays available for larger volumes. This adaptability makes it an excellent choice for businesses with fluctuating printing demands.

When it comes to environmental considerations, the SLP38C is Energy Star certified, showcasing its commitment to energy efficiency. This certification ensures that businesses can maintain sustainable practices without compromising on performance.

In summary, the Savin SLP38C combines high-quality printing, advanced technology, and user-friendly features, making it a reliable choice for any business looking to enhance its printing capabilities. With its exceptional speed, resolution, and connectivity options, it stands out as a powerful tool in the office printing landscape.
Top Page Image Contents