Savin SLP38C manual Envelopes, Paper not supported by this printer

Page 62

3

54

Appendix

❖ Envelopes

• When printing on envelopes, use the Bypass Tray.

• Specifications of envelopes are as follows:

 

Metric version

Inch version

 

 

 

Weight

72 - 90 g/m2

19 - 24 lb

Recommendedweight

72 g/m 2, 114 ⋅ 162 mm

24 lb, 37/8" ⋅ 71/2"

and size

(C6 Env)

(Monarch)

 

 

 

• You can load up to 10 envelopes (72 - 92 g/m2, 19 - 24 lb) in the Bypass Tray at the same time, without forcibly pressing them. Confirm that the envelopes are not damp, and that the top of the stack is n\ot higher than the limit mark on the side guide.

• Confirm that the print side is facing up when loading onto the Bypass Tray.

• Load the envelopes with the flaps aligned to the left side fence. The flaps should be securely folded up.

• Confirm that there is no air in the envelopes before loading.

• To get better print quality, it is recommended that you set the right, left, top, and bottom print margin, to at least 15 mm (0.6") each.

• Do not print on both sides of envelopes.

• Load only one size and type of envelopes at the same time.

• Before loading envelopes, flatten the leading edges (the side being fed into the printer) of them by running a pencil or ruler across them.

• Before loading envelopes, confirm that they are rectangular in shape.

• Supported size of envelope is listed on "Paper and Other Media" in Mainte- nance Guide 2.

❖ Paper not supported by this printer

Avoid using the following types of paper that are not supported by this printer:

• Paper meant for an ink-jet printer

• Bent, folded, or creased paper

• Curled or twisted paper

• Torn paper

• Wrinkled paper

• Damp paper

• Paper that is dry enough to emit static electricity

• Paper that has already been printed onto, except a preprinted letterhead

• Coated paper

• Special paper, such as thermal paper, aluminum foil, carbon paper and conductive paper

• Paper whose weight is heavier or lighter than the limitation.

• With windows, holes, perforations, cutouts, or embossing

• Label paper on which glue or base paper is exposed

• Paper with clips or staples

Page 61 Page 63
Image 62
Page 61 Page 63
Contents Maintenance Guide Page Trademarks Safety Information Safety During OperationIii Low-power Mode Energy Saver mode Specifications Energy Star ProgramHow to Read This Manual SymbolsTable of Contents Replacing Consumables and Maintenance Kit Detaching the SR770 2 Tray FinisherLower the Duplex Reversal Unit slowly until it stops Opening and Closing the Duplex Reversal UnitPush up the lock release button and keep it in place Replacing the Toner Cartridge Add TonerTake out a new toner cartridge from the box Unhook the green hook on the toner cartridge with one handShake the toner cartridge back and forth 5-6 times Loading Toner Close the upper right coverReplace Fuser Oil Unit TypeG Turn off the power switch and unplug the power cableReplacing the Fuser Oil Unit Pull out the left cover of the print- er slowlyDo not touch any areas other than the handle ZDJH054E Plug in the power cable and turn on the power switch Replace Color PCU Type a Replacing the Photoconductor UnitReplace Black PCU Type F Take out the green screwdriverLift the inner cover until it clicks into place and holds Remove the Photoconductor Unit you want to replaceInstall a new Photoconductor Unit Take the unit out from the bagLower the inner cover slowly Tighten two screws using provid- ed screwdriverCalibrating Turn the light brown lever clock- wiseReplace Color Dev. UnitTypeB Replacing the Development UnitReplace Black Dev. UnitTypeD Install a new Development Unit Remove the Development UnitZDJH227J Please Wait Pull out the left cover of the print- er Replacing the Fusing UnitReplace Fusing Unit Type C Remove the Fuser Oil Unit in the direction of the arrow Press # for Fuser Adjust Initializing Please WaitOpen the Bypass Tray Adjust the side guides to the paper widthSet Sheet Bypass, then # Pull out the Bypass Tray Exten- sion, and then flip it openInvalid Value Press # C D E F G H 0 0 0 0 0 0 0Ready Replacing the Dustproof Filter Wear the glove on either handAttach the small filter Replacing the Waste Toner Bottle Replace Waste Toner Type EPush it in until it stops Pull out all trays slowly while lift Ing it up a little Check the contents of the boxReplacing the Paper Feed Rollers Confirm the position of the paper feed rollersZERH040E ZERH090E Replacing Consumables and Maintenance Kit Clearing and Adjusting the Printer Cleaning the Registration Roller Close the right cover by pushing the area labeled PushCleaning the DustProof Glass Adjusting the Color Registration When you have made all the set- tings, press On Line Completed Color Regist Auto AdjustWhen replacing the fusing unit Fuser Adjust At Unit Replace Color Regist Fuser AdjustCannot Adjust See User’s Guide Invalid Value Cannot AdjustWhen color shifting occurs Fuser Adjust Custom AdjustCustom Adjust Plain 600dpi Load A4L or larger paper in the Bypass TrayPress # for Test Print Bypass Select Action Exit Re-adjustSelect Action +1 Re-adjust Maintenance Color Regist Set Sheet, then# A3 297 XAdjustment a -7.0 +7.0 +0 Color Regist Manual AdjustManual Adjust Print Result Adjustment a -7.0 +7.0 +2ColorRegistSheet Fuser Adjust Sheet Test Sheet SamplesFuser Adjust Sheet Menu Maintenance Ready Adjusting the Image DensityMaintenance Image Density Image Density BlackRegistration Adjustment Adjusting the Registration of the TraysMaintenance Registration Registration Prt. Test SheetAdjustment Vert. Tray Vert. Tray 3 -4.0 +4.0Appendix Removing Misfed Paper in the Duplex Feed UnitAppendix Removing Misfed Paper in the Duplex Feed Unit Push in the Transfer Unit until it stops When the Front Cover Does Not CloseClose Front Cover When the Front Cover Does Not Close Staple Cartridge ConsumablesToner cartridge Other consumables Name Consumables Average printable number PagesPaper Recommendations Plain PaperThick Paper OHP transparenciesEnvelopes Paper not supported by this printerPrintable Area Index Copyright UE USA G060-6920

SLP38C specifications

The Savin SLP38C represents a compelling choice in the world of color laser printers, designed to meet the diverse printing needs of small to medium-sized businesses. This versatile printer combines advanced features with high-quality performance, making it suitable for various applications, from intricate graphics to vibrant presentations.

One of the standout features of the SLP38C is its exceptional print resolution. With a maximum resolution of up to 1200 x 1200 dpi, it produces crisp, detailed prints that are sure to impress. This level of clarity is particularly beneficial for marketing materials and professional documents that require a polished look. The printer also offers fast print speeds, with outputs of around 38 pages per minute for black and white and color prints. This efficiency helps streamline workflow, especially in busy office environments.

The SLP38C employs cutting-edge LED technology, which enhances both print quality and reliability. The LED system minimizes moving parts, resulting in less wear and tear and a longer lifespan for the printer. Additionally, its compact design allows it to fit comfortably in tight workspaces without sacrificing print quality or speed.

Connectivity is another significant advantage of the Savin SLP38C. It features multiple connectivity options, including USB, Ethernet, and support for wireless networking. This flexibility allows users to connect seamlessly from various devices, including computers, mobile devices, and tablets, making it easier to print from virtually anywhere in the office.

The printer's user-friendly interface is another highlight. The intuitive control panel simplifies navigation through settings, print jobs, and maintenance tasks. Furthermore, the SLP38C supports automatic duplex printing, which not only saves paper but also reduces the overall cost of printing.

In terms of handling, the Savin SLP38C boasts an impressive paper capacity. It comes with a standard paper tray that can hold up to 250 sheets, with optional additional trays available for larger volumes. This adaptability makes it an excellent choice for businesses with fluctuating printing demands.

When it comes to environmental considerations, the SLP38C is Energy Star certified, showcasing its commitment to energy efficiency. This certification ensures that businesses can maintain sustainable practices without compromising on performance.

In summary, the Savin SLP38C combines high-quality printing, advanced technology, and user-friendly features, making it a reliable choice for any business looking to enhance its printing capabilities. With its exceptional speed, resolution, and connectivity options, it stands out as a powerful tool in the office printing landscape.
Top Page Image Contents