Settings You Can Change with the User Tools
Settings You Can Change with the User Tools
Reference
1
For how to access the User Tools, see ⇒ P.4 “Accessing the User Tools (System Settings)”.
Basic Page 1
Menu | Description |
|
|
Operation Panel Beeper | The beeper (key tone) sounds when a key is pressed. |
| This beeper can be turned on or off. |
| Note |
| ❒ Default: On |
|
|
Ready Operation Panel | Specify whether to sound the beeper when the machine be- |
Beeper | comes ready for copying immediately after Energy Saver |
| mode is deactivated or the power is turned on. |
| Note |
| ❒ If the “Operation Panel Beeper” setting is “Off”, the |
| beeper does not sound irrespective of the “Ready Opera- |
| tion Panel Beeper” setting. |
| ❒ Default: On |
|
|
Copy Count Display | The copy counter can be set to show the number of copies |
| made (count up) or the number of copies remaining to be |
| made (count down). |
| Note |
| ❒ Default: Up (count up) |
|
|
Auto Response (Hu- | If the machine does not detect anyone using it for a certain |
man) Sensor | period of time, it will switch automatically to one of the reset |
| modes – Auto Reset, System Reset, Energy Saver mode, Low |
| Power mode or Auto Off. You can cancel this setting. |
| If “Low Power Timer” is set to “0”, “Auto Response (Hu- |
| man) Sensor” is disabled. |
Note
❒Default: Yes (On)
Reference
See “Low Power Timer” in ⇒ P.7 “Basic Page 1”.
7