1
User Tools (System Settings)
Menu | Description |
|
|
Cover | You can specify any tray as a Cover Sheet or Slip Sheet 1, 2 |
Slip Sheet 1 | and make them indicated. |
| |
Slip Sheet 2 | Reference |
| See “Cover/Slip Sheet” in the Copy Reference manual. |
Note
❒The paper tray you have specified with “Cover” is used for the cover sheets in the Front Cover or Front/Back Cover function.
❒The paper tray you have specified with “Slip Sheet 1” or “Slip Sheet 2” is used for the slip sheets in the Designate or Slip function.
You can set the tray with the following steps.
ATray Selection
BTray Display
CIn duplex copying the way to copy on paper.
1. Tray Selection
•You can specify any tray as a Cover Sheet or Slip Sheet 1, 2.
2. Tray Display
•To display “Cover” or “Slip Sheet”, select either “Mode Selected” or “Display Always”.
Note
❒If you select “Mode Selected”, “Cover” or “Slip Sheet” is displayed only when the Cover or Slip Sheet function is selected.
3. In duplex copying the way to copy on paper.
•When specifying “Mode Selected”, you can specify the way to copy on paper in duplex copying.
16