Velodyne Acoustics SC-1250., SC-8, SC10, SC-12, SC-15, SC-IW, SC-IF, SC-IC Restoring Defaults

Each preset has its own characteristics with respect to subsonic filter, volume differential and a single equalizer (EQ) in order to optimize the listening mode for the preset.

The following table shows the settings for the various presets:

Restoring Defaults

There is a feature that allows you to restore default settings for your SC-1250. By pressing presets in EXACTLY the following order on the remote, the unit’s power light will blink indicating that you have restored defaults.

Preset 1: Movies

Preset 2: R&B – Rock

Preset 3: Jazz – Classical

Preset 4: Games

Preset 4: Games

Preset 3: Jazz – Classical

Preset 2: R&B – Rock

Preset 1: Movies

When you press the presets in the above order, the numeric LED will display “P3” indicating that you have restored defaults. The unit’s volume is reset to level 30 out of 80.

Care of your Amplifier and Subwoofer

Do not use any harsh detergents or chemicals to clean the SC-1250 chassis or the subwoofer cabinet. Abrasives, detergents, or cleaning solutions will damage the finish on the SC-1250 chassis or the subwoofer cabinet. We recommend using a damp cloth to clean the front, back and sides.

During normal conditions, the amplifier may be left on continuously without any problems. If you plan to leave the unit unused for an extended period of time, we recommend that you turn off the unit by the master power switch on the front panel.