Pin

TERMINAL SETUP AND USAGE

RS-232 and USB Connections

Pin Connections The following are the possible options for cable adapters to support the peripherals for the Vx700:

1Serial Port (COM 1): Logical Port 1 (USB Slave, Serial, Power)

•6-Wire RS232 port with TX, RX, RTS, CTS, DTR, and DCD signals.

•Provides for back-to-back download capability.

•Pin 10 allows the terminal to be turned off by raising this pin high; a low on this pin re-powers the unit (default is low if this feature is not implemented by the host).

Table 2 Logical Port 1 (UPSTREAM) Serial connections

PIN	RJ-48 (10 Way Connector)

1TX

2RX

3RTS

4CTS

5DTR

6VIN 9 - 28V

7GND

8DCD

9MDB 12V

10RECYCLE POWER

2USB Slave: Logical Port 1 (USB Slave, Serial, Power)

•Provides for 2-Wire USB device port.

•Port is directly connected to CPU USB ports and is a USB slave.

•Power is not supplied from the USB Host, Pin 1 is NC. This configuration powers the Vx700 by the DC Jack.

Table 3 Logical Port 1 (UPSTREAM) USB connections

PIN	Mini USB “B” (5 way connector)

1NC

2nUSB (Slave)

3nUSB (Slave)

4NC

5GND

22VX700 INSTALLATION GUIDE

RJ-48 (10 Way Connector)

Mini USB “B” (5 way connector)