Velodyne Acoustics SC-IF/IC installation manual 6b, and 6c Speaker wire connection

Page 10

Step 9 -

Secure wiring. Attach the speaker wire to the speaker terminals. A 16 AWG or heavier wire is recommended. Be sure to secure the speaker wire so it does not rattle or buzz against the cabinet during use. BE SURE NOT TO CROSS THE SPEAKER WIRES AS THIS CAN DAMAGE THE AMPLIFIER.

Figure 6a, 6b, and 6c: Speaker wire connection.

.w w w . v e l o d y n e . c o m

SC-IF/IC User’s Manual

Image 10

Contents SC-IF/IC U t i o n Table of Contents Product Overview Wor d About GrillesInstallation Step By- Step StepMount brackets on subwoofer cabinet Affix foam strips SC-IF In-Floor positioned into floor location Tighten the brackets 6b, and 6c Speaker wire connection Finished installation with register Register. . . on Line . . . It’s faster . . . and easier 110V 230V Other Velodyne ProductsVelodyne Acoustics, Inc