Verbatim Wireless Network Multimedia Hard Drive manual Use as External USB HDD, Copy Data via USB

1.Use as External USB HDD

1.1Copy Data via USB

It is possible to use as a external USB hard disk drive in case of inserting hard disk into MediaStation PRO. You can copy data from your PC to built-in HDD of MediaStation Pro via USB. It is possible to play media files at the hard disk on TV set.

* When connecting PC, you have to connect power cable of MediaStation Pro

1.1.1Windows 2000, XP, Vista

1)After connecting MediaStation Pro and plug power cable, Windows itself will install driver automatically. And then, check the driver installation at Windows [Start > Settings > Control panel > (switch to classic View on Windows XP) > system > Hardware > Device manager > Universal Serial Bus controllers > USB Mass Storage Device ].

3)After copying data, remove MediaStation Pro with using remove icon at Windows right-down corner. If you don’t follow this procedure, data and MediaStation Pro may have damage.

2)Check ‘My Computer’ or ‘Explorer’, there should be a new volume. You can copy any data to this volume.

✓ When you see ‘Non High-Speed USB Hub Message’

The message will be displayed On windows XP when you plug MediaStation Pro into USB 1.1 spec. Host adapter.

✓If new volume is not be appeared, check HDD format or not. W and HDD file system. Windows 2000, XP detect both FAT32 and NTFS file system.

5