6.3 Network Setup
It is possible to obtain an IP address automatically from DHCP Server or IP Router, or set the specific IP address. Check your network environment.
✓Note
DHCP On: You can use this option when it is possible to obtain IP address automatically from DHCP Server or IP Router. (Recommended for most users)
DHCP Off: When it is not possible to obtain IP address automatically or you connect to your PC directly without DHCP Server or IP Router, you have to use this option. Just write IP address and Subnet mask.
‘DHCP Support On’ Setup Procedure
DHCP Support OFF Setup Procedure
①Turn on MediaStation Pro and press [SETUP] on Mode Selection screen.
①Turn on MediaStation Pro and press [SETUP] on Mode Selection screen.
②Move to ‘Network’ icon and press [OK]. Setup box will be displayed under icon menu.
③ Select ‘DHCP
④ Finally, press [SETUP] again for saving configuration..
②Move to the ‘Network’ icon and press [OK]. Setup box will be displayed under icon menu.
③ Select ‘DHCP
✓Check the obtained IP address
Press [INFO] on Mode Selection screen, and you will see the current IP address obtained from the DHCP
④Move to ‘IP Address’, ‘Subnet’ and press [OK]. Input box will be displayed, enter number with [Direction] button or [Number] button. Finally, press [ENTER] for saving configuration.
✓Check the obtained IP address
Press [INFO] on Mode Selection screen, and you will see the current IP address obtained from the DHCP server.
18