Verbatim External Hard Drive NAS manual Connecting NAS drive Using USB

Page 10

Connecting NAS drive

Using USB

Connecting your NAS drive to a USB host, such as a PC or Mac, is extremely simple. Follow the steps below.

Note: If your computer is running Windows 98 Second Edition, you will need some additional software that you can download from the Verbatim web site. Refer to the Getting Help section.

1.Connect the included AC Adapter to the NAS drive, and then to a wall outlet using the included power cord.

2. Next press the ON/OFF button on the front of the NAS drive.

3. Finally, connect the included USB cable from the USB-B port on the NAS drive to an available USB port on your computer.

4.The NAS drive will mount automatically, and a new icon will appear in My Computer (Windows) or a new icon will appear on the desktop (Mac).

Note: If you are using a USB 1.1 port on your Windows computer, the

following cautionary note may appear on your display: Hi-Speed USB Device plugged into non-Hi-Speed USB hub. This does not indicate a problem because the NAS drive is compatible with both USB 1.1 and USB 2.0 ports. Simply close the message and proceed. However, in this case the NAS drive will operate only at USB 1.1 speeds.

Storing and Transferring Data via USB

Once your drive is connected to a computer via USB-B, it can be accessed and used like any other removable disk. You can drag files to your unit’s icon to copy them, navigate to your unit in Open or Save dialog boxes, or delete files stored on your unit. For information on copying, opening, or deleting files, consult your computer’s documentation.

10

Image 10
Contents External Hard Drive NAS Contents NAS Drive Operation Using Ethernet Format Scan Unmount Detail System Log Administration Log Account Information Logout Controls, Connectors and Indicators IntroductionRear Panel Area About the Hard Disk Which Interface USB or Ethernet?Locating NAS Drive on Your Desk Page Connecting NAS drive Using USB Storing and Transferring Data via USBDisconnecting NAS drive from a PC or Mac Host For Windows UsersConnecting NAS Drive Using Ethernet About NAS Drive User AccountsConnecting the NAS Drive to Your LAN Page Web-Based Administration Tool Administration Login Basic Settings for Initial Setup Set Language, Password, Hostname, IP Address, and TimeAdd New User Account Page Add New Group Add New Shared Folder NAS Drive Operation Using Ethernet Run Dialogue Sharing files using WindowsBrowse Network Neighborhood Browse My Computer Sharing files using Mac OSSearch Dialogue Attaching USB DevicesAttaching a Printer Attaching a USB Storage Device NAS Administration Reference Basic Users and Groups User ManagementGroup Management File and Print File ServerNFS Server Setting Share ManagementPrinter Server Network SettingsSystem Information Time SettingsTurn Off Server Disk UsageError Notification Network ServiceDhcp Server MaintenanceBonjour Disk Utility FormatRestore Configuration Firmware UpgradeSave Configuration Samba Log Factory ResetLog File FTP LogAccount Information Administration LogLogout Limited Warranty Terms Technical SupportRights FCC ComplianceWeee Notice CE DeclarationRoHS Compliance