on the HOLD icon. Then, select a memory by pressing s or t to go to the memory or input the memory number then press HOLD.
Scanning Memory Banks
To scan the memories you have programmed, press SCAN. The scanner scans all unlocked programmed memories in enabled memory banks, stopping on a memory when it detects a transmission. To turn on/off memory banks while scanning, press the number button that corresponds to the memory bank you want to enable or disable.
Locking/Unlocking Memories
You can lock memories so that they are not scanned, even if their bank is turned on. Simply press L/O when the scanner stops on a transmission on the frequency or manually select the memory, then press L/O. The scanner turns on the L/O icon when it is set to a memory that is locked out.
To unlock a memory, manually select the memory, then press L/O. The scanner turns off the L/O icon and includes the memory when scanning its bank.
To unlock all memories, press and hold L/O for 2 seconds, the scanner beeps twice and the L/O icon disappears.
Using Priority Scan
You can set one memory in each bank as a priority memory. If you turn on the Priority feature, the scanner will check the priority memories in enabled banks every 2 seconds, even if it has stopped on a transmission on another memory.
To set the memory in a bank to be the priority memory, manually select the memory then, while holding on the memory, press E/PGM to put the scanner in program mode and press PRI. The scanner turns on the PRI icon when it is stopped on a memory designated as priority.
To turn on Priority Scan, press PRI while the scanner is scanning or holding on a memory (but not in program mode). You will notice a short break in audio every 2 seconds as the scanner checks the enabled priority memories. If there is a transmission on a priority memory, the scanner will immediately tune to that memory.
Using the Scanner Memories
22
UBC40CRS OM.indd | 7/5/08 4:8:9 PM |