Features
Channel Memory Scanning - Scans frequencies you have stored in any of the channels or banks at a rate of up to 60 channels per second.
Memory Availability - Store and then scan any of up to 100 channels distributed over 10 banks.
Direct Channel Access - Press 0 − 9 and HOLD to directly access any stored frequency.
Channel Lockout/Frequency Lockout - Skip over stored frequencies (channels) using the Lockout feature to enable faster scanning. Lets you designate up to 50 frequencies to skip during a search (limit or service) to increase the scanning speed.
Alarm Clock with Snooze - provides standard radio broadcasts that you can set as your alarm sound.
AM/FM and TV Broadcast - lets you store up to 30 preset broadcast channels (10 AM and 20 FM/TV) for quick access. TV Broadcast allows tuning to the audio of CH
Air Band - separate search setting for Air band, 118MHz to 136.9875MHz.
Priority Channel - Designate a specific frequency as a Priority Channel. Then the radio scans and checks that channel every 2 seconds. Select and designate up to 10 frequencies as Priority Channels (one per bank).
Duplicate Channel Alert - Lets you know that a selected frequency has already been programmed into memory if you attempt to store it again.
Limit Frequency Searching - Lets you designate lower and upper frequency range and search within that range for active frequencies. You can then store frequencies in memory as channels for later recall.
Service Search - Lets you designate one of the five preprogrammed service channels (Police, Marine, Railroad,
Scan and Search Speed
• | Scan Speed | 60 channels per second maximum in SCAN MODE. |
• | Search Speed | 60 steps per second maximum in SEARCH MODE. |
•TURBO MODE For frequency steps 5kHz apart, searching occurs in Turbo Mode which is 180 steps per second.
Introduction
UBC40CRS OM.indd 7 | 7/5/08 4:8:06 PM |