General Information
You are now logged into the Configuration tool for the WNP1000 Wireless AP. To navigate the tool, click on any items located on the left side of the page.
The fields on the “General Information” page are described below. To see the current status, click the Refresh button.
∙Hardware Version: Displays the hardware version of your WNP1000 Wireless AP.
∙Software Version: Displays the version of the software installed on the WNP1000 Wireless AP. This changes whenever you install a software upgrade.
∙Time since last boot: Displays the time that has elapsed since the WNP1000 Wireless AP was last started.
11
∙LAN MAC Address: Displays the Ethernet MAC address of the LAN (Ethernet) interface of the WNP1000 Wireless AP. A MAC address consists of six
∙Wireless MAC Address: Displays the MAC address of the wireless interface of the WNP1000 Wireless AP.
∙IP Address: Displays the IP address of the local LAN interface of the WNP1000 Wireless AP. The default IP address is 192.168.1.10.
∙Subnet Mask: Displays the local subnet mask of the LAN interface of the WNP1000 Wireless AP. The default subnet mask is 255.255.255.0.
12