Uniden BC350C manual Prog KEY

Press this key as many times as it

takes to find the band you want to

search.

IMPORTANT: This key has a very

important secondary function.

In Program Mode, you can press

[BAND] to leave this mode.

[PROG] KEY

This key initiates and completes

programming. It is active whenever a

steady frequency appears on the

display. Press [PROG] to start

Programming Mode. " CH " appears

and blinks, indicating you are in

Programming Mode, and urges you

to select the channel of the bank to

be programmed. Press a

programmable bank key ([PRIVATE],

[FIRE/EMS] or [POLICE]) to be

programmed.

Note: If you press a non-

programmable bank key ([WX],

[AIR/MRN], or [CB]), “ Error” will

be displayed, press a programmable

bank key and try above steps again.

VOLUME Control/

This control turns the scanner on or

Power Switch

off, and also adjusts the volume.

SQ (Squelch) Control

Adjust [SQ] to set the scan

threshold. When you are monitoring

a single channel in Manual Mode,

adjust [SQ] to eliminate the

background noise heard in the

absence of an incoming signal.

LCD Display

The liquid crystal display (LCD)

shows the current channel or its

frequency. It also displays the mode

indicators, status indicators, and

bank indicators. (See “Screens” on

page 15 for more information.)