STORING PHONE NUMBERS AND NAMES
NOTE
When storing a number, always include your area code (eg: 02), so name tagging will operate (refer page 15).
NOTE
The pause feature is useful for long distance calling, credit card dialing, or sequences that require a pause between digits.
Memory Dialing allows you to dial a number using just a few key strokes. You can store up to 59 phone numbers in the memory.
Since each step must be completed within 10 seconds, it may be advisable to review these instructions before starting.
1.Press and hold 
until MEMORY STORE is displayed.
2.Press
or 
or enter a two digit
number ( 0 1 5 9) to select the memory location where you would like to store the number.
3.Press 
- STORE NAME is displayed and a cursor flashes indicating that the display is ready for the name to be entered.
If this screen appears, the selected memory location has a number already stored.
4.Use numeric key to enter the name.
The name cannot exceed 16 characters.
Use # 
and 
to move the cursor to the next letter - or to create a space.
Use
to delete characters as needed.
5.Press 
- STORE NUMBER is displayed.
6.Use the number keypad to enter the phone number. It cannot exceed 24 digits.
Use
to enter a pause. The screen displays P.
Each pause counts as one digit and represents one and half second delay in time between digits.
Use 
to delete digits as needed.
7.Press
- the handset beeps and displays the confirmation screen.
8.Press 
to return to standby mode or select another location to programme.
MEMORY STORE 01
EMPTY
02 EMPTY
STORE NAME 01
STORE NUMBER 01
STORE NUMBER 0295993355
MEMORY 01 STORE
MEMORY STORE 01
FRED
02 JOHN SMITH
10