REGISTRATION
The original handset supplied with the Main Base is already registered as Handset 1, this leaves Handset numbers 2 - 7 available. It is very important to allocate each handset a different number to enable functions such as Call Transfer.
| Registration Process |
|
If a handset is registered at | Follow this process for each additional Handset (DSS2105) that needs to be registered to the Main Base | |
or for registering your Main Handset. |
| |
any time as handset 1, all | 1. Remove the handset from its charger |
|
other handsets will need to | 2. Press flash/reg on the handset (Fig 1). |
|
be registered again from Step | 3 Press the number 2 (Fig 2) for handset 2. |
|
|
| |
1. |
| REGISTER AS |
|
| |
| Fig 1. | HAND #2 |
| Fig 2. | |
|
| |
If you have additional |
|
|
handsets, repeat the same |
|
|
process, but at Step 2 select |
|
|
a number from 3 - 7 to | 4. Place the handset in the Main Base Unit (Fig 3). |
|
register the next handset as. |
| |
5. Press and hold the Registration button located on the back of the Main Base unit near the DC | ||
| power jack (Fig 3). Hold the Registration button in until a long beep confirms the handset has | |
| been registered. |
|
The Registration process needs to be completed within 15 seconds, 5 beep tones will indicate that the time has been exceeded. Please start the process again.
After Registration the | Fig 3. |
|
|
|
|
|
|
handset number is shown on |
|
|
|
|
|
|
|
the Display screen either |
|
|
|
|
|
| Handset |
|
|
|
|
|
| ||
during a call or while the | Fig 4. | HANDSET | 1 | TALK HIGH 1 |
| ||
| |||||||
handset is charging (Fig 4). |
| NEW: | 0 |
|
| Registration | |
|
|
| number | ||||
| TOTAL: | 0 |
|
| |||
|
|
|
| displayed | |||
|
| Charging |
|
| On a Call |
|
|
14