UP409ZH
SETTING UP THE MENU
Entering the Menu
1) | Press the | /del key in standby mode. |
|
| |||
2) | Use /vol/ | or /vol/ to move the pointer to | DirectLink Mode |
| a desired main menu (DirectLink Mode, Room Monitor, | Room Monitor | |
| Handset Setup, Global Setup, and System Reset). | Handset Setup | |
3)Press 
to select the desired main menu.
4)Use 
/vol/ 
or 
/vol/ 
to select a desired submenu, and then press
to enter.
In the submenu, use 
/vol/ 
or 
/vol/ 
to select an item. Press 
to confirm your selection. For detailed instructions, see the following sections for the desired submenu.
5)To exit the menu, press 
or place the handset to the cradle.
DirectLink Mode
Entering the Two Way Communication between the Handsets Anywhere without the Base
1) Enter the DirectLink Mode menu (see “Entering the Menu” on page 13). To enter DirectLink mode press [SELECT] appears.
2)Press 
to enter the DirectLink mode. You will
hear a confirmation tone, and DirectLink Mode Complete appears.
To adjust ringer volume, press 
/vol/ 
or 
/vol/ 
to select one of three ringer volume (off, low, or high).
3)To return back to the normal mode, exit the DirectLink mode. To exit the DirectLink
mode, press 
/del, and then 
, or return the handset to the cradle.
DirectLink Mode Cancel appears.
To back to the previous screen,
press 
/del.
[ 13 ]