Uniden 2315+2 quick start Setting the Dial Mode Australia only, Copy Phonebook

UP409ZH (WDECT2315-2) OM 12/22/05 3:27 PM Page 18

Setting the Dial Mode (Australia only)

1)Enter the Global Setup menu, and then the Dial Mode submenu (see “Entering the Menu” on page 13).

2)Press /vol/ or /vol/ to change the select, Tone or Pulse (the initial setting is Tone).

3)Press . You will hear a confirmation tone.

Copy Phonebook

Dial Mode

Tone

Pulse

•If you receive a call or set up the Global Setup menu, the transfer will

be canceled.

•If an error occurs, the phonebook locations transferred before the error were stored in the receiving handset.

Unavailable appears on

the display.

•When the memory of the receiving handset is full, Not enough memory in Receiving Handset appears. You cannot transfer the phonebook location.

[ 18 ]

1)	Enter the Global Setup menu, and then the Copy
			Copy	Phonebook
	Phonebook submenu (see “Entering the Menu” on
	page 13).		One	Memory
2)	Press /vol/ or /vol/ to choose One		All	Memory :xxx
	Memory or All Memory, and then press	.
	If you choose All Memory, go to step 4.

3)Press /vol/ or /vol/ , or the number keypad (0-9) to select the

phonebook location you want to export, and then press .

4)Press /vol/ or /vol/ to select the handset to which you want transfer the

phonebook locations, and then press .

If you choose All Memory in the step 2, Are you sure? appears.

Press /vol/ or /vol/ to select Yes, and then press .

The phonebook locations will be transferred to the handset. On the receiving handset, Receiving and the handset name appear. When the transfer complete, Done! appears on the handset.