Nikon D70 manual Custom Setting 19 Flash Mode, 150, Shooting conditions

Menu Guide—

Custom Setting 19: Flash Mode

To choose the flash mode for the built-in Speed- light, highlight Flash mode in the detailed CSM menu ( 135) and press the multi selector to the right. Press the multi selector up or down to high- light an option, then press to the right to make a selection.

	19 Flash mode
	TTL	OK
	Manual
?	Commander mode

Custom Settings

Option	Description
TTL	Output of built-in Speedlight is adjusted automatically in response to
(default)	shooting conditions.
	Menu at right will be displayed. Highlight set-
		19 Manual
	ting between Full (full power) and 1/16 (1/16 of
			Full power OK
	full power) and press multi selector to right to
			1/2 power
	return to CSM menu. When mode dial is set to
			1/4 power
	P, S, A, or M, flash will fire at chosen fraction
Manual			1/8 power
	of full power whenever built-in Speedlight is
			1/16 power
	raised (at full power, built-in Speedlight has GN
	[m/ft] of 17/56 [ISO 200] or 12/39 [ISO 100]).		icons blink in control
	panel and viewfinder. No monitor preflash is emitted, allowing built-in
	Speedlight to function as master flash for optional slave flash units.

Choose this option to allow camera to con- trol flash level when one or more SB-800 or SB-600 Speedlights are used for wireless flash photography in P, S, A, or M mode. Menu at right will be displayed; choose TTL (i-TTL flash control, available only with CPU lens), AA (Auto Aperture, available only

when CPU lens is used with SB-800), or M Commander (Manual). Selecting M displays menu shown

mode at right; press multi selector up or down to choose output level for wireless flash unit from values between Full (full power) and 1/128 (1/128 of full power). Press multi se- lector to right to return to CSM menu.

*If Commander mode is selected, will not be displayed in flash sync mode icon when built-in Speedlight is raised.

19 Commander mode
TTL	OK
AA
M
19 M
FULL	OK
1/2
1/4
1/8
1/16

150