Issue 2
POWER SUPPLY
SPECIFICATIONS
Input: | |
| IEC 320 input receptacle |
Output: | 24VDC, 1A Regulated |
| 5.5mm x 2.5mm connector center |
| positive (mating wire assembly |
| included) |
Dimensions: | 4.125” H x 1.625” W x 1.375” D |
| (102mm H x 40mm W x 30mm D) |
Weight: | 0.9 lbs. (0.4 kg) |
Mounting: | Wall or shelf, mount near an |
| electrical outlet (wall mount |
| hardware included) |
Features: | Output voltage indicator |
FOR INDOOR USE ONLY
OUTPUT CONNECTIONS
Connect “+” wire to connection labeled GND on Valcom equipment
Connect
REGULATORY INFORMATION
UL, cUL and CE Approvals
Meets VDE and FCC Class B Regulations
TECHNICAL ASSISTANCE
When trouble is reported, verify that AC power is being supplied to the unit. To test the power supply, remove all output connections, and measure the output voltage with a meter. If no voltage is measured, replace the unit.
Assistance in troubleshooting is available from the factory. When calling, you should have a VOM and a test set available and be calling from the job site. Call (540)
Valcom equipment is not field repairable. Valcom, Inc. maintains service facilities in Roanoke, VA. Should repairs be necessary, attach a tag to the unit clearly stating your company name, address, phone number, contact person and the nature of the problem. Send the unit to:
Valcom, Inc.
Repair and Return Dept.
5614 Hollins Road
Roanoke, VA
1 | 947702 |