Viking Memory, Acer | Viking 367D, 366D instruction

Viking Memory

I N S T A L L A T I O N G U I D E

ACER®

Extensa 365 Series (Model 367T, 367D, 366D)

Manual No. 1005246 • Release 07/98, Rev. A

S P E E D P O W E R P E R F O R M A N C E

The Acer Extensa 365 Series (Model 367T, 367D, 366D) comes stan- dard with 32MB (16MB soldered + 16MB module) of memory. It can be expanded to a maximum of 80MB* by installing the following Viking Components memory options into its one available expansion slot.

Description	Viking P/N
16MB SDRAM Memory Module	AC80420, RAC80420
32MB SDRAM Memory Module	AC80421, RAC80421
64MB SDRAM Memory Module	AC80422, RAC80422

*Requires the removal of the standard memory module.

Caution:

Electro Static Discharge (ESD) can damage electronic components. Before touching the memory module, ensure that you are discharged of static elec- tricity by touching a grounded metal object.

INSTALLATION INSTRUCTIONS:

1.Turn the computer off and disconnect the AC power supply and any other cables from the unit.

Note: If the unit appears to be powered down, ensure that it is not in Suspend mode.

2.Turn the computer upside-down. Remove the battery from the system. If you are not familiar with this procedure, please refer to your computer’s “Owner’s Manual.”

3.Facing the front of the computer, locate the memory expansion cover on the right- side of the bottom panel. Also locate the three holding screws on the left-side of this cover. Remove only these three screws with a small Phillips-head screwdriver. Then remove the cover by lifting it up.

4.Locate the single memory expansion slot in the open compartment. Also locate the off-center key on the slot. There will be a standard memory module occupying the expansion slot.

5.In order to upgrade your system past 32MB of memory, its standard memory module will need to be removed. To remove a memory module, locate the retaining clips on both sides of the memory module. Gently pull both clips away from the module and then lift the module out of its expansion slot.

6.To install a memory module, insert the module into an expansion slot at an angle and then push it down until it clicks into place. To be certain that the module is installed correctly, ensure that the off-center notch on the module is aligned with the off-center key of the expansion slot. The module can only be installed one way due to the position of the notch.

7.Replace the memory expansion cover back to its original position and be sure to secure its three holding screws.

8.Insert the battery back into its compartment and turn the system right- side up.

9.Replace the AC power supply and any other cables you may have dis- connected.

10.Open the display screen and turn the system on. The computer will automatically reconfigure itself to recognize the additional memory. The new memory can be verified during the POST routine at start-up and at the SETUP utility.

The installation is now complete.

366D, 367T, 367D specifications

Viking 366D, 367T, and 367D are part of a series of high-performance mowers that embody the spirit of innovation and efficiency in lawn care technologies. These models are engineered to meet the demanding needs of both professional landscapers and dedicated homeowners, providing an ideal blend of power, agility, and durability.

One of the standout features of the Viking 366D is its robust diesel engine, which delivers maximum torque and power while ensuring fuel efficiency. This model is equipped with advanced engine technology that reduces emissions, allowing for environmentally friendly operation without sacrificing performance. The 367T model, on the other hand, comes with a powerful petrol engine that is designed to tackle tougher terrains and larger areas with ease. Both engines have been engineered for minimal vibration and noise, contributing to a more comfortable user experience.

All three models feature a cutting deck made from high-quality, corrosion-resistant materials. The cutting width ranges from 36 to 38 inches, making it suitable for various lawn sizes, from residential backyards to larger commercial properties. The unique blade design optimizes grass cutting and ensures a clean finish while promoting healthy grass growth.

Technologically, the Viking 367D and 367T provide users with an intuitive control panel and ergonomic handles, making adjustments and operations straightforward, even for less experienced users. The models incorporate precision cutting height adjustments, which enable users to personalize their mowing experience based on grass type and seasonal requirements. Furthermore, the quick-release system allows for easy access to the cutting blades for maintenance and sharpening.

The durability of the Viking mowers is enhanced by their heavy-duty frames, designed to withstand rough usage over time. They also feature puncture-proof tires that offer excellent traction and stability on uneven ground, ensuring a smooth mowing experience.

In summary, the Viking 366D, 367T, and 367D are exemplary models that emphasize efficiency and durability in lawn care. Their advanced engine technology, robust build, and user-friendly features make them a reliable choice for anyone looking to maintain their outdoor spaces effectively. Whether for personal use or professional landscaping, these mowers promise exceptional performance and long-lasting results.